Preparation 3 - Registering Size Of Paper Placed; Registering Standard Size (Ld, Lt, Lt-R, Lg, St-R) - Toshiba e-studio 165 Operator's Manual For Copying Functions

Preparation 3 - Registering Size of Paper Placed

When you place paper in a drawer for the first time or when you place paper whose size is differ-
ent from that of the paper which has been placed in the drawer, the new paper size needs to be
registered into the equipment.
Registration of standard sizes (LD, LT, LT-R, LG, ST-R) differs from that of standard sizes other
than these.
The paper size can be registered on the LCD screen by checking menus.
P.126 "Paper Size Setting"

Registering standard size (LD, LT, LT-R, LG, ST-R)

In this section, LT size is registered in the drawer of the equipment as an example.
1
Press and hold the [COPY] and [DRAWER] buttons simultaneously
for more than two seconds.
The LCD screen shows as follows:
Select paper size
2
Press the [DRAWER] button several times until the lamp of the
drawer in which you placed paper is lit.
100% NONSORT
ZOOM FINISHING

Preparation 3 - Registering Size of Paper Placed

1
EDIT
45