Preparation 2 - Placing Copy Paper; Acceptable Media Types - Toshiba e-studio 167 Operator's Manual For Copying Functions

1 PREPARATION

Preparation 2 - Placing Copy Paper

Place copy paper in an appropriate paper source before you start copying.

Acceptable media types

Acceptable media types differ depending on its paper source. See the table below for the details.
Feeder
Drawers of
the equip-
ment and
Paper Feed
Unit
(optional)
Drawers of
the Paper
Feed Ped-
estal
(optional)
Bypass tray Plain paper
*1 "Maximum sheet capacity" refers to the maximum number of sheets when TOSHIBA-recommended
paper is used. See the following page for the TOSHIBA-recommended paper:
P.39 "Recommended paper"
*2 The paper of 50 to 63 g/m
*3 Automatic duplex copying is not available.
*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
You cannot mix various paper sizes in one drawer.
"LT format" is the standard size for only use in North America.
Abbreviations for LT format sizes:
LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer
38

Preparation 2 - Placing Copy Paper

Media type
Plain paper A/B format:
2 A3, A4, A4-R, B4, B5, B5-R, FOLIO
(64 - 80 g/m )
LT format:
LD, LG, LT, LT-R, COMP, 13"LG
Plain paper A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
2
(64 - 80 g/m )
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
A/B format:
2 *2 A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
64 - 80 g/m )
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
THICK PAPER 1
2 *3
(81 - 105 g/m )
THICK PAPER 2
2 *3
(106 - 163 g/m )
Tracing paper
2 *3
(75 g/m )
*3
Sticker labels
*3, *4
A4 only
Transparencies
2
can be used if it is set on the bypass tray one by one.
Paper size
Maximum sheet
*1
capacity
250 sheets
2
(64 g/m )
250 sheets
2
(80 g/m )
550 sheets
2
(64 g/m )
550 sheets
2
(80 g/m )
100 sheets
2
(64 g/m )
100 sheets
2
(80 g/m )
1 sheet
2
(81 - 105 g/m )
1 sheet
2
(106 - 163 g/m )
1 sheet
1 sheet
1 sheet