Ford 1997 Aerostar Workshop Manual page 35

1997 Aerostar/Ranger
aluminum gouges easily.)
2. Position a new gasket on water pump sealing surface using Gasket and Trim Adhesive D7AZ-
19B508-B or equivalent meeting Ford specification ESE-M2G52-A to hold gasket in position.
3. Install water pump on engine front cover and hand-tighten 12 attaching bolts. Refer to
Cover in this section for tightening specifications.
4. Reinstall lower radiator hose at water pump and radiator and tighten clamps.
5. Reinstall power steering pump support bracket to engine and torque to (5 fasteners) (Ranger) 48-61
Nm (35-45 lb-ft) or (3 fasteners) (Aerostar) 40-54 Nm (30-40 lb-ft).
Power Steering Support Bracket — Aerostar
Part
Item Number
1 3A674
2 3C511
3 N800199-
S309
4 3A733
5 6B209
6 N606068-
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B20.HTM~gen~ref.HTM
Description
Power Steering Pump
Power Steering Pump Support
Bolt
Power Steering Pump Pulley
Drive Belt Tensioner
Bolt
tomsn048@gmail.com
Page 4 of 11
Engine Front
2011-04-27