Ford 1997 Aerostar Workshop Manual page 130

1997 Aerostar/Ranger
drive belt over the radiator.
Item Part Number
1 3F671
2 19D629
3 3D673
4 6B209
5 6312
6 8A528
7 10300
9. Remove the fan shroud retaining bolts. Using Strap Wrench D85L-6000-A or equivalent to hold the
water pump pulley, remove the fan blade and fan clutch assembly. Remove the fan blade and fan
shroud as an assembly.
10. Remove the radiator overflow hose from the radiator and position it out of the way. Remove the
accessory drive belt.
11. Compress the clamp on the lower radiator hose and disconnect the hose from the radiator.
12. Disconnect the automatic transmission oil cooling lines from the radiator fittings. Install protective
caps over the lines.
13. Remove the radiator bolts. Tilt the radiator back and lift it directly upward, clear of the radiator support
bracket.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B40.HTM~gen~ref.HTM
Description
Belt Idler Pulley
A/C Compressor
Power Steering Pump Pulley
Drive Belt Tensioner
Crankshaft Pulley
Water Pump Pulley
Generator
tomsn048@gmail.com
Page 3 of 12
2011-04-27