Operation; Applications - Ryobi CIT1800G Owner's Operating Manual Original Instructions

Compatible battery pack
(not included)
Lithium-Ion BPL-1820
BPL-1815
BPL18202PK
RB18L13
RB18L15
RB18L26
RB18L40
RB18LL40
Nickel ABP1801G
Cadmium ABP1802G
ABP-1813
ABP-1815
RB18N15
* for vehicles with 12V DC outlets

OPERATION

Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Do not attempt to modify this inflator or create
accessories not recommended for use with this inflator.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes resulting in
possible serious injury.
Compatible
(not included)
BCL1418
BCS618
BCL14181H
BCL14183H
BCL1418IV*
BCL1418
BCS618
ACR1800G
260022029
BCL14181H
BCL14183H
BCL1418IV*
WARNING
WARNING
WARNING
WARNING
English
charger
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
Do not leave items to be inflated unattended while
inflator is in use. These items can burst and could
cause serious injury.
The inflator is not designed for continuous use. For
every ten minutes of inflator use, ten minutes of cool
down time are required.
Since the pressure gauge is not calibrated, and is
therefore not binding for exact values, tire pressure
must be checked using a reliable measuring device
before driving a vehicle with vehicle tires inflated with
the inflator. Driving a vehicle with improperly inflated
tires could result in serious injury.
The inflator is capable of inflating to 150 PSI, 10.3 BAR,
or 1030 kPa. To avoid over inflation, carefully follow
instructions on items to be inflated. To avoid product
damage, never exceed recommended pressures.

APPLICATIONS

You may use this tool for the purposes listed below.
„ Inflating high pressure items like motorcycle, car, and
bicycle tires.
„ Inflating and deflating low pressure items like air
mattresses, rafts and floats.
NOTE: The tool is not designed for commercial application.
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium
battery packs.
For complete charging instructions, refer to the Operator's
Manuals for your Ryobi One+ battery pack and charger
models.
8
WARNING
WARNING
CAUTION
WARNING
CAUTION