Motion Detection - Samsung SCB-5003 User Manual

SENSITIVITY : Set the sensitivity to tampering detection.

ALARM OUT : Outputting of detection signals can be set.

EXTERNAL : Send signals through external terminals.
OSD : Display signals on the screen.
RETURN : Return to the TAMPERING menu.
RETURN : Return to the VIDEO ANALYTICS menu.

M
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
- MOTION : This product
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
DET. SIZE : Selects an object

DET. AREA : Set the areas of

SEL AREA : Select from four
MODE : Determine whether to
SENSITIVITY : Set the sensitivity of the motion detection. When you adjust
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
RETURN : Return to the MOTION DET menu.
size to detect on
the screen.

motion detection.

areas that users
want.
use the selected area.
the higher level, the more sensitive.
MOTION DET
DET. SIZE
▶ 1.
DET. AREA
2.
NON DET. AREA
3.
4. INDICATOR
ALARM OUT
5.
RETURN
6.
MOTION DETECT AREA
SEL AREA
▶ 1.
MODE
2.
SENSITIVITY
3.
TOP
4.
BOTTOM
5.
LEFT
6.
RIGHT
7.
RETURN
8.
OFF
AREA
1
ON
5
---- ----

1
--------

100
--------

1
--------

100
--------

English_31