00355A(01) SCC-931T(P)-eng
2006.1.10
CAMERA MENU Organization
SHUTTER
In the SHUTTER menu, you can specify the speeds of the high-speed electronic
shutter, AUTO low-speed shutter, and FIX low-speed shutter.
The high-speed electronic shutter supports 7 shutter speeds from 1/100 seconds to
E
1/10K seconds, and the AUTO low-speed shutter and the FIX low-speed shutter
support 12 shutter speeds from 2x to 128x respectively.
The low-speed shutter is a function that enables you to set the shutter speed to a
slow setting to obtain a clearer video. Select AUTO low-speed shutter in order to
have the camera detect the amount of light and automatically set the shutter speed
to a slow setting according to the degree of darkness. Select the item starting with
FIX to specify the shutter speed yourself.
If you repeatedly press the LEFT/RIGHT Directional keys, the shutter speeds will
appear in the following order:
CAMERA ID
OFF...
IRIS
ALC...
AUTO FOCUS
AF
SHUTTER
AUTO X8
MOTION
F.FAST
WHITE BAL
ATW
Using the [LEFT,
SYNC
INT
RIGHT] keys
SPECIAL
...
MOTION DET
OFF
EXIT
QUIT
¡
¡
OFF
1/100(NTSC), 1/120(PAL)
¡
¡
¡
¡
1/10K
OFF
AUTOX2
¡
¡
¡
AUTOX16
AUTOX24
AUTOX32
¡
¡
¡
¡
AUTOX128
OFF
FIXX2
¡
¡
¡
FIXX16
FIXX24
FIXX32
30
1:49 PM
Page 30
CAMERA ID
OFF...
IRIS
ALC...
AUTO FOCUS
AF
SHUTTER
AUTO X12
MOTION
F.FAST
WHITE BAL
ATW
SYNC
INT
SPECIAL
...
MOTION DET
OFF
EXIT
QUIT
¡
¡
¡
¡
¡
1/250
1/500
1/1000
1/2000
1/4000
¡
¡
¡
AUTOX4
AUTOX6
AUTOX8
AUTOX12
¡
¡
¡
AUTOX48
AUTOX64
AUTOX96
¡
¡
¡
¡
FIXX4
FIXX6
FIXX8
FIXX12
¡
¡
¡
FIXX48
FIXX64
FIXX96
FIXX128
AGC/MOTION
➼
AGC (Auto Gain Control)
You can specify whether to control the AGC GAIN when the obtained video is
below a certain level of brightness because it was recorded under insufficient
lighting.
From the SET UP MENU, use the UP/DOWN
keys while in the high-speed SHUTTER
(1/100 ~ 1/10K) mode or OFF mode to position
to AGC, use the LEFT or RIGHT key to position
to ON, and execute the AGC function.
➼
MOTION
This can be used when in low-speed AUTO, and there are five levels:
S.SLOW, SLOW, NORM, FAST, and F.FAST.
- S.SLOW is used to minimize the AGC GAIN to monitor motionless objects in
dark places.
- SLOW is used to lower the AGC GAIN to monitor objects that do not move
about much in dark places.
- NORM is used to set the AGC GAIN to medium to monitor moving objects in
dark places.
- FAST is used to increase the AGC GAIN to monitor fast moving objects in
dark places.
- F. FAST is used to maximize the AGC GAIN to monitor very fast moving
objects in dark places.
E
CAMERA ID
OFF...
IRIS
ALC...
AUTO FOCUS
AF
SHUTTER
OFF
AGC
ON
WHITE BAL
ATW
SYNC
INT
SPECIAL
...
MOTION DET
OFF
EXIT
QUIT
31