Using Coaxial Communications - Samsung SCB-5003 User Manual

connection

using Coaxial CommuniCaTions

Coaxial Communications System

OSD Control method

- Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below. If the distance between the camera and the monitor
exceeds the recommended maximum, please use an auxiliary video amp.
M
It is recommended that pure copper coax cable is used and not copper coated steel, as this will
cause issues with the communication over the coaxial cable.
1_ connection
CAMERA
SET
UP
DOWN
LEFT
RIGHT
DVR
DVD RECORDE R
OPEN/CLOSE
DVR
MENU/ENTER
UP KEY
DOWN KEY
LEFT KEY
RIGHT KEY
ALARM HDD NETWORK BACKUP REC
REC
1 2 3 4
5 6 7 8 ZOOM FREEZE BACKUP SEARCH
9 10 11 12
TELE WIDE VIEW PRESET
MODE AUDIO ALRAM MENU
13 14 15 16
USB
RETURN
Distance
300m
450m
600m
CONTROLLER
OSD KEY
JOYSTICK UP
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
Recommended Cable
Specification
3C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)