Live - Clover C1704DVR User Instructions

2.5

Live

Live means viewing the present video images from the cameras on the screen.
LIVE MODE
► Full screen display
Full display is possible in the Live mode or Record mode.
Use channel selection button to choose a corresponding video input.
► Quad display
All 4 cameras are viewed on the monitor at the same time in reduced size.
Quad display is available in Live mode or Record mode.
► Sequential display
Sequential display is to set sequencing period when automatic screen sequencing mode is
selected in real time live mode. The sequential display is possible in Live mode.
Press the SEQ button. Default value for Sequential display is 2 seconds and the maximum
interval value is 7 seconds. Refer to chapter 3.6 Video Setup (SETUP>VIDEO>DWELL TIME)
for more details.
Press the button again to switch off the sequential mode.
► FREEZE
Freeze is available in Live mode but only works when the DVR is not recording.
In the Full screen mode
- Press the FREEZE button to freeze the current display.
- Press the FREEZE button again or press another channel selection button to release the
Freeze function.
- When the FREEZE button is pressed, FREEZE mark will be shown on the screen.
Freeze Mark
- 11 -