Commissioning, inspection, maintenance
Further details regarding the individual steps
3. Pull electrical cables from fan motor
A, gas valve B, ionisation elec-
trode C, ignition unit D and earth
tab E.
4. Undo gas supply pipe fitting F.
Checking the burner gasket and the burner gauze assembly
Check burner gasket A and burner gauze assembly E for damage and replace, if
required.
36
(cont.)
5. Release four nuts G and remove the
burner.
!
Please note
Prevent damage to the wire
gauze.
Never rest the burner on the
gauze assembly.