Setting Up A Printer - Toshiba Tecra A9 Series User Manual

To make the connection, you need a suitable USB cable which may
come with your printer. If a USB cable was not included with your
printer, you can purchase one from a computer or electronics store.
If your printer supports Plug and Play, your computer may
automatically recognize the printer; the printer is then ready for use.
Refer to your printer documentation for further instructions.
If your printer does not support Plug and Play, you can set up the
printer as described in
To connect a printer to your computer:
1
2

Setting up a printer

NOTE
If your printer does not support Plug and Play, follow these steps to
set it up for the first time. You only need to set up the printer once.
1
Downloaded from LpManual.com Manuals
TECHNICAL NOTE: To determine if your printer supports Plug and
Play, check its documentation.
Connect the printer cable to the printer and then connect the
other end to one of the computer's USB ports.
Plug the printer's power cable into a live AC outlet.
Some printers require a specific installation process. Refer to your
printer installation guide for instructions before completing the
following procedure.
Click Start, and then Printers and Faxes.
The Printers and Faxes window appears.
Connecting a printer
"Setting up a printer" on page
Getting Started
69.
69