Advertisement
V I I . B A S I C T R O U B L E S H O O T I N G
What if my PMV does not move when I engage the throttle control lever?
When the manual freewheel lever is pushed forward, the brakes are disengaged and all power to the
motor/transaxle assembly is cut.
Push rearward on the manual freewheel lever, turn the PMV off, and then turn the PMV on to return
to normal PMV operation.
What if the main circuit breaker repeatedly trips?
If the main circuit breaker trips repeatedly, see your authorized Provider for service.
Charge the batteries more frequently. See III. "Batteries and Charging."
If the problem continues, have all of your PMV's batteries load tested by your authorized Provider.
You may also perform the load test yourself. Battery load testers are available at most automotive parts
stores. Follow the directions supplied with the load tester.
See III. "Batteries and Charging" or the additional "Product Specifications Sheet" for information
about your PMV's battery type.
What if the battery condition meter dips way down and the motor surges or hesitates when I engage
the throttle control lever?
Fully charge your PMV's batteries. See III. "Batteries and Charging."
Have your authorized Provider load test each battery.
See the previous troubleshooting question for load testing the batteries yourself.
If you experience any problems with your PMV that you are not able to solve, immediately contact your
authorized Provider for information, maintenance, and service.
PMV Series
29
Advertisement
