Advertisement
V . C O M F O R T A D J U S T M E N T S
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust
the distance between the seat and the tiller.
1. Move the seat sliding lever located at the lower left
side of the seat outward. See figure 15.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.
ACCESSORY BRACKET
The rear-mounted accessory bracket allows you to
attach a personal accessory such as a basket, walker
holder, or oxygen tank to the back of your PMV. Utilize
the detent pin to securely mount your item to the
accessory bracket. See figure 15. See your authorized
Provider for details.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to two different heights.
See figure 16.
1. Remove the seat and rear shrouds from your PMV.
2. Remove the batteries.
3. Remove the seat height adjustment bolt.
4. Raise or lower the upper seat post to the desired seat
height.
5. While holding the upper seat post at that height,
match up the locating holes in the upper seat post
with those of the lower seat post.
6. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat posts.
7. Reinstall the nut onto the seat height adjustment bolt
and tighten.
8. Reinstall the batteries.
9. Reinstall the rear shrouds and the seat.
POSITIONING BELT (OPTIONAL)
Your PMV seat may be equipped with an auto-type posi-
tioning belt that can be adjusted for operator comfort.
The positioning belt is designed to help support the oper-
ator so that he or she does not slide down or forward in
the seat. The positioning belt is not designed for use as a
restraining device.
PMV Series
IDENTIFICATION KEY
1. UPPER SEAT POST
2. NUT
3. SEAT HEIGHT ADJUSTMENT BOLT
4. LOWER SEAT POST
1
3
4
Figure 16. Seat Height Adjustment
Figure 17. Positioning Belt Bolts
2
25
Advertisement
