Brinkmann 3091 Pellet Fuel Grill Owner's Manual page 18

Step 4
Attach the left front and rear legs (with
wheel axle holes) to the grill body
assembly. First, insert the bottom
shelf into the left rear leg, then move
bolted end of leg until bolts align with
holes in the grill body assembly. Attach
using four M6 X 12 mm bolts, M6 fl at
washers and M6 nuts. Hand tighten
only. Repeat this step for left front leg.
Tighten all bolts and nuts for each leg
attached to the grill body assembly.
Step 5
Insert wheel axle through left front
and rear legs and attach wheels using
two M12 nuts as illustrated. Tighten
securely.
Note: With the help of a friend, lift
the grill body assembly to
an upright position. Try to
minimize the stress to the legs.
CAUTION: Keep lid closed when
setting unit upright to
prevent bodily injury.
17
Grill Body
Assembly
M6 X12 mm
Bolts
M6 Flat
Washers
M6 Nuts
Left Front Leg
(with Axle Holes)
Wheel
M12 Nut
Grill Body
Assembly
Bottom View
Left Rear Leg
(with Axle Holes)
Bottom Shelf
Wheel Axle