4.7.6
Time Zone Setting
The System time is the time used by RB-6132 Broadband Router for scheduling services.
You can manually set the time or connect to a NTP (Network Time Protocol) server. If a NTP
server is set, you will only need to set the time zone. If you manually set the time, you may
also set Daylight Saving dates and the system time will automatically adjust on those dates.
1.
Current Time
Users can input the time manually.
2.
Time Zone Select
Select your time zone location from the drop-down list.
3.
Enable NTP client update
Check to enable NTP client update.
4.
Automatically Adjust Daylight Saving
If you are in daylight saving time area, please enable this item.
5.
NTP server
Please select the NTP server from the pull-down list, or you can enter the NTP server IP
address manually.
http://www.sapido.com.tw/
80
User Manual v1.0.0