Sapido RB-6132 User Manual page 65

1. Enable Port Forwarding
Enable Port Forwarding to allow an external user to reach a port within a private LAN.
2. IP Address
Specify the private IP address of the internal host offering the service.
3. Protocol
Specify the transport layer protocol (TCP or UDP).
4. Public/Private Port Range
Enter the Start and End ports in the range you'd like to forward. If you're just forwarding 1 port,
set them both equal. For example 80-80 or 20-22。
5. Comment
You can add comments for this port forwarding rule.
6. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the
input data.
7. Current Port Forwarding Table
It will display all port forwarding regulation you made.
8. Delete Selected & Delete All
http://www.sapido.com.tw/
65 User Manual v1.0.0