Hardware Installation; Attaching Antennas; Hardware Mounting Installation - ZyXEL Communications ZyAIR G-3000 Quick Start Manual

6 Hardware Installation

6.1 Attaching Antennas

Follow the steps below to connect the supplied antennas.
Locate the antenna connectors on the sides of your ZyAIR.
1.
Screw the antennas clockwise onto the antenna connectors. The antennas should be perpendicular
2.
to the ground and parallel to each other.
Make sure the antennas are securely screwed onto the antenna

6.2 Hardware Mounting Installation

In general, the best location for the access point is at the center of your intended wireless coverage area. For
better performance, mount the ZyAIR high up free of obstructions.
Free-standing
Place your ZyAIR on a flat, level surface (on a desk or shelf) that is strong enough to support the weight of
the ZyAIR with connection cables.
Follow the steps to position your ZyAIR on a level surface. You can use the diagrams below for
1.
instructions on how to do this.
ZyAIR G-3000 Quick Start Guide
connectors.
Figure 3 Attaching Antennas
15