Toshiban lämmitys- ja jäähdytyslaitteiden jälleenmyyjä pääkaupunkiseudulla on Jäähdytinpalvelu RefGroup Oy
No.
Part name
1. Detachment
Drain pan
1) Perform works of items 1 of
2) Remove clamps of the lead wires con-
NOTE :
Remove the connector by releasing locking
of the housing.
3) Remove screws fixing earth lead wire in
4) Remove indoor/outdoor inter-unit cable
5) Remove screws fixing the electric parts
6) Remove screws fixing the bell mouth.
7) Remove the drain cap, and drain water
NOTE 1 :
When removing the drain cap, be sure to
prepare a bucket to catch the drained water.
NOTE 2 :
Thermal insulator is adhered to the drain
cap. Be careful not to peel off the insulator.
If the insulator has been peeled, adhere it
with double-face tape, etc. as before.
8) Remove screws fixing the drain pan.
2. Attachment
1) Fix the parts, drain cap, drain pan, bell
2) Connect connectors, earth lead wire,
Procedure
of
and 1 of
.
nected to the following connectors of the
control P .C. board.
CN34
: Float switch (3P: Red)
CN68
: Drain pump (3P: Blue)
CN101 : TC sensor (2P: Black)
CN102 : TCJ sensor (2P: Red)
CN333 : Power supply of fan motor
(5P: White)
CN334 : Position detection of fan motor
(5P: White)
the electric parts box. (Ø4 x 6, 2 pcs.)
and remote controller cable of the termi-
nal block.
box. (Ø4 x 10, 5 pcs.)
(Ø4 x 10, 6 pcs.)
accumulated in the drain pan.
(Ø4 x 8, 4 pcs.)
mouth, and electric parts box succes-
sively to their original positions.
indoor/outdoor inter-unit cable, and
remote controller cable which have been
disconnected in the above item 1 as
before.
– 173 –
www.ilmalämpöpumput.com
RAV-SM560/800/1100/1400UT-E
RAV-SP1100UT-E
, 1 of
, 1
Remarks
Screws fixing earth lead wires
Drain cap
Screws fixing drain pan