Stanley Easikey 250 User And Installation Manual page 43

Programming
Both Easikey 99 / 250s should be installed and initialised as described in this manual.
However, please note the following:
•
You should add the same Editor Keys to each Easikey 99 / 250.
•
Ensure that the Lock Release Times for each lock are programmed in exactly the
same way on each controller.
•
The lock type (Fail-Safe / Fail-Secure) must be the same on both controllers.
•
Note to which controller each key is added. If you need to delete a key then you
must know to which controller it was added.
43