Internal Power Wiring; Lock Wiring - Stanley Easikey 250 User And Installation Manual

Internal Power Wiring

The diagram below describes the wiring provided inside the cabinet. This provides for
battery backup through a harness capable of connecting two batteries, and two lock 12v
lock outputs through a terminal block.
All wiring is multistranded 0.5mm²
Power Supply
240v AC
Fuse: 1.0 Amp
Reader Wiring
See the section on Reader Wiring for instructions on reader wiring.

Lock Wiring

See the section on Installing Locks and Power Supply for information on lock wiring.
Battery Backup
There is room in the cabinet for two 6Ah batteries giving a total of 12 Ah supply. See the
section on Battery Backup for more information.
Easikey Controller
P1 P2 L1 L2
Fuse: 3.15 Amp
27
L3 L4
Batteries
(Reader wiring
not shown)
Battery Fuse: 3.15 Amp
Lock Fuse: 3.15 Amp
Max. dist: 100m
Lock 1
MOV
Lock 2
MOV