Displaying The Current Firmware Version Number; Configuring The Buzzer On The Controller; Silent Mode Operation - Stanley Easikey 250 User And Installation Manual

3. Present the same Editor Key again to confirm:
Firmware Version

Displaying the Current Firmware Version Number

1. Remove power from the Easikey 250.
2. Re-apply power:

Silent Mode Operation

Configuring the Buzzer on the Controller

1. Present an Editor Key:
2. Press the Middle button to display the current mode:
PAC Easikey 250
Editor Key : 0
Controller Only
34
V1.00
1:Y 2:Y