Running Master Disk Creator - Toshiba Satellite 200 Series User Manual

Create Master Diskettes or Purchase the CD-ROM
Microsoft Windows 95 diskette labels provided with your
computer.
You can run only Create System Disks one time. Make sure
you don't lose your Windows 95 diskettes once you've
created them.
To run Create System Disks, follow these steps:
1 Make sure the diskette drive is connected to the computer.
If you're unsure how to do this, see "Connecting the External
Diskette Drive" on page 21.
You may also swap the CD-ROM and diskette drive, according
to the instructions in "Swapping Drives in the SelectBay" on
page 104.
2 Click Start, then point to Programs.
3 Point to Accessories, then point to System Tools.
4 Click Create System Disks.
Windows 95 opens the Create System Disks program. Follow
the instructions on the screen to create the program diskettes.

Running Master Disk Creator

Master Disk Creator creates program diskettes for the rest of the
programs pre-installed on your computer (if you decide not to buy
the CD-ROM). It is a very simple program to use. You'll need up
to 40 high-density diskettes to hold a complete set of program files
(more if you are using Windows for Workgroups). Label the dis-
kettes as indicated by Master Disk Creator.
To run Master Disk Creator, follow these steps:
1 Make sure the diskette drive is connected to the computer.
If you're unsure how to do this, see "Connecting the External
Diskette Drive" on page 21.
Let's Start at the Very Beginning
37