Toshiba Satellite 200 Series User Manual page 103

106
Learning the Basics
Swapping Drives in the SelectBay
Remove the Drive from the SelectBay
Follow these steps to remove the drive from the SelectBay:
1 Turn the computer upside down with the front of the com-
puter facing you.
Releasing the drive from the SelectBay
2 Slide the bay release lock toward the rear of the computer.
3 Pull up on the bay release until the drive ejects slightly.
Pull the release only as far as needed to eject the drive. The
release is not intended to be pulled straight up.
Removing the drive from the SelectBay
4 Grasp the drive and pull it out.
5 If you removed the diskette drive from the SelectBay, slide
it into the external chassis until you feel it click into place.
If you removed the CD-ROM drive, set it aside.
Bay release
Drive
Bay release lock