Toshiba Satellite 200 Series User Manual page 38

Let's Start at the Very Beginning
Create Master Diskettes or Purchase the CD-ROM
Inserting a diskette
8 Insert the appropriately labeled blank formatted diskette
into the diskette drive.
9 In the MDC Disk Creation Confirmation screen, choose a
Write method and click Create Disk.
Master Disk Creator begins copying files to the diskette and
displays a meter monitoring the copying process.
10 When Master Disk Creator prompts you to, press the disk
eject button to remove the diskette.
If the diskette drive light is on, do not remove a diskette.
Doing so could destroy the information on the diskette and
damage the diskette and/or the drive.
11 Write-protect the diskette by moving the tab on the back of
the diskette to expose the write-protect hole.
Write-protecting a diskette prevents you from erasing or over-
writing the information on the diskette.
12 Continue inserting and removing diskettes according to
the instructions on the screen.
Since creating program diskettes will take some time, now is a
good time to fill in your registration card if you haven't yet
done so. It also gives you time to skim through the remainder
of this manual and fill in the reader response card. Toshiba wel-
comes your comments and suggestions for improving the qual-
ity of the documentation.
39
Disk eject button
Diskette drive
Protective cover
Label