Toshiba Satellite 200 Series User Manual page 280

Refer to "Connecting the Computer to the NoteDock" on
page 226 for instructions.
Printers
This section lists some of the most common printer problems.
The printer won't print.
If your printer is ECP- or IEEE 1284-compliant, make sure
you have an IEEE 1284 printer cable.
Make sure the printer is connected to power and the printer
itself is ready (on line).
Make sure the data cable between the computer and the printer
is firmly attached at both ends.
You may have connected the printer with the computer on.
Disable Resume Mode, turn off the computer, and turn off the
printer. Turn the printer back on, make sure it is on line, then
turn the computer back on.
Try printing another file. For example, you could create and
attempt to print a short test file using Notepad. If a Notepad file
prints correctly, the problem may be in your original file.
Check the printer port and driver. Click Start, Settings, then
Printers. Next, click on the icon for your printer using the sec-
ondary mouse button and click Properties in the menu list.
Finally, click the Details tab and confirm that the port and
driver options are correct.
Sometimes it helps to delete the printer and install it again.
Click Start, Settings, then Printers. Click your printer using the
secondary mouse button and click Delete in the menu list. Fol-
low the instructions in "Setting Up Windows 95 to Work with
Your Printer" on page 87 to install the printer again.
The printer won't print what you see on the screen.
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview
If Something Goes Wrong
Fixing Device Related Problems
293