Using Drag-And-Drop - Toshiba Satellite 200 Series User Manual

the Application Explorer dialog box
The following sections describe each of these methods. Experi-
ment with each to find the one that best suits your tastes.

Using Drag-and-Drop

To use the drag-and-drop method of assigning a key to a program
or document, follow these steps:
1 Open both Fn-esse and the Windows Explorer.
2 Resize the Explorer window so that you can see both the
Fn-esse keyboard and the Explorer at the same time.
If you're unsure how to do this, refer to "Lesson 6: Resizing
and Reshaping Windows" on page 60.
3 In the Explorer window, highlight the program or docu-
ment file you wish to assign to a key.
4 Click and hold the primary button as you drag the high-
lighted item from the Explorer to the key on the Fn-esse
keyboard to which you wish to assign it.
5 Release the primary button.
Fn-esse displays the Add/Edit Command dialog box com-
pletely filled in to reflect the selected program or document.
6 Choose OK to close the Add/Edit Command dialog box
with your key assignment in place.
The program or document is now associated with the key you
just selected. To open the program or document, press
the appropriate key from within any Windows program.
Using the Browse for Applications Dialog Box
To use the Browse for Applications dialog box to assign a key to a
program or document, follow these steps:
1 Click the desired key in the Fn-esse keyboard with the sec-
ondary button.
Fn-esse displays the Assignment Type dialog box.
Making Life Easier
Starting Programs Faster
243
plus
Fn