Miele G 7836 CD Operating Instructions Manual page 12

Warning and safety instructions
Only use chemical agents
formulated for special processes
and approved by Miele for use with this
machine. Use of unsuitable agents
could adversely affect the components
of the machine. Any resultant damage
would invalidate the machine
guarantee.
Pre-treatments with cleaning or
disinfecting agents can create
foam, as can certain types of soiling
and chemical agents. Foam can have
an adverse effect on the disinfection
and cleaning process.
Where a chemical additive is
recommended on technical
application grounds (e.g. a cleaning
agent), this does not imply that the
manufacturer of the machine accepts
liability for the effect of the chemical on
the items being cleaned.
Please be aware that changes in
formulation, storage conditions etc.
which may not be publicised by the
chemical manufacturer, can have a
negative effect on the cleaning result.
When using cleaning agents and
specialised products it is essential
that the manufacturer's instructions are
followed. Chemicals must only be used
for the purpose they are designed for
and in the situation specified, to the
exclusion of other chemicals, to avoid
such dangers as chemical reactions
and material damage.
12
The machine is designed for
operation with water and
recommended additive chemical
agents only. Organic solvents must not
be used in this machine, as there is the
danger under certain circumstances of
fire or explosion. Although this is not the
case with all organic solvents, other
problems could arise with their use, for
example damage to rubber and
synthetic materials.
In critical applications where very
stringent requirements have to be
met, it is strongly recommended that all
the relevant factors for the process,
such as chemical agents, water quality
etc. are discussed with the Miele
Application Technology specialists.
If cleaning and rinsing results are
subject to particularly stringent
requirements (e.g. chemical analysis,
specialised industrial processes etc.), a
regular quality control test must be
carried out by the user to ensure that
the required standards of cleanliness
are being achieved.
Mobile units, baskets and inserts
should only be used for the
purpose they are designed for.
Hollow instruments must be thoroughly
cleaned, internally and externally.
Empty any containers or utensils
before arranging them in the
machine.