Igmp; Ikesnoop - D-Link DFL-260E Reference Manual

2.2.33. ikesnoop

2.2.32. igmp

IGMP Interfaces.
Description
Show information about the current state of the IGMP interfaces.
Send simulated messages to test configuration of the interface.
Usage
igmp
Prints the current IGMP state.
igmp -state [<Interface>]
Prints the current IGMP state. If an interface is specified, more details are provided.
igmp -query <Interface> [<MC address> [<router address>]]
Simulate an incoming IGMP query message.
igmp -join <Interface> <MC address> [<host address>]
Simulate an incoming IGMP join message.
igmp -leave <Interface> <MC address> [<host address>]
Simulate an incoming IGMP leave message.
Options
-join
-leave
-query
-state
<host address>
<Interface>
<MC address>
<router address>
2.2.33. ikesnoop
Enable or disable IKE-snooping.
Simulate an incoming IGMP join message.
Simulate an incoming IGMP leave message.
Simulate an incoming IGMP query message.
Show the current IGMP state.
Host IP address.
Interface.
Multicast Address.
Router IP address.
48
Chapter 2. Command Reference