Settings; Arptablesettings - D-Link DFL-260E Reference Manual

3.55. Settings

3.55. Settings
This is a category that groups the following object types.

3.55.1. ARPTableSettings

Description
Advanced ARP-table settings.
Properties
ARPMatchEnetSender
ARPQueryNoSenderIP
ARPSenderIP
UnsolicitedARPReplies
ARPRequests
ARPChanges
StaticARPChanges
ARPExpire
ARPExpireUnknown
ARPMulticast
ARPBroadcast
ARPCacheSize
ARPHashSize
ARPHashSizeVLAN
LogResolveFailure
The Ethernet Sender address matching the hardware address in
the ARP data. (Default: DropLog)
If the IP source address of an ARP query (NOT response!) is
"0.0.0.0". (Default: DropLog)
The IP Source address in ARP packets. (Default: Validate)
Unsolicited ARP replies. (Default: DropLog)
Specifies whether or not the ARP requests should automatically
be added to the ARP table. (Default: Drop)
ARP packets that would cause an entry to be changed. (Default:
AcceptLog)
ARP packets that would cause static entries to be changed.
(Default: DropLog)
Lifetime of an ARP entry in seconds. (Default: 900)
Lifetime of an "unknown" ARP entry in seconds. (Default: 3)
ARP packets claiming to be multicast addresses; may need to be
enabled for some load balancers/redundancy solutions. (Default:
DropLog)
ARP packets claiming to be broadcast addresses; should never
need to be enabled. (Default: DropLog)
Number of ARP entries in cache, total. (Default: 4096)
Number of ARP hash buckets per physical interface. (Default:
512)
Number of ARP hash buckets per VLAN interface. (Default: 64)
Specifies whether or not to log failed ARP Resolves. (Default:
Yes)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
182