Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
TURNTABLE MOTOR
WARNING
Electrical Shock Hazard
Refer to page 4-19 for the procedure for ac-
cessing the turntable motor.
1.
Unplug microwave oven or disconnect
power.
2.
Disconnect one of the wire connectors
from the motor terminals.
3.
Set the ohmmeter to the R x 1K scale.
4.
Touch the ohmmeter test leads to the turn-
table motor terminals. The meter should
indicate approximately 2450 Ω.
5-8