KitchenAid KBMS1454R Technical Education page 30

8. To remove the touch panel board:
a) Lift the ribbon cable retaining bar and
pull the cable from its holder.
b) Press out on the holder clip, and re-
move the touch panel board from the
holder.
c) Disconnect the touch panel board
ground wire from its panel terminal.
Holder Clip
Ribbon Cable
Lift Bar
Touch Panel Board
Ground
Connector
9. To remove the selector board:
a) Pull the knob off the selector board
control shaft.
b) Remove the T10 Torx screw from the
selector board and remove the board
and its mounting bracket.
c) Disconnect the 3-wire connector from
the selector board.
3-Wire
Connector
4-4
Selector
Board Screw
Pull Knob
Off Shaft
Selector Board
Bracket & Screw