Removing The User Interface Board - KitchenAid KBMS1454R Technical Education

Kitchenaid built-in microwave oven technical education
Hide thumbs Also See for KBMS1454R:
Table of Contents

Advertisement

REMOVING THE USER INTERFACE BOARD

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug microwave oven or disconnect
power.
2.
Remove the microwave oven from its
mounting location.
3.
Remove the eleven T10 Torx screws from
the top cover of the microwave.
4.
Lift the back of the cover, slide the spring
tab out of the control panel slot, and re-
move the cover.
Screw (1 of 11)
5.
CAUTION: Discharge the high voltage
capacitor (see page 4-17) using a
20,000 Ω resistor from the terminals to
chassis ground.
Slide Spring Tab
Out Of Slot
Top Cover
4-2
6.
Disconnect the six ribbon cables from the
user interface board connectors.
User Interface Board
To Display
To Touch Panel
To Electronic
7.
Unclip the user interface board from the
holder and remove it from the unit.
Board Clip
User Interface Board
To Touch Panel
To Selector
Control
Board

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents