Setting of scene change detection
This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing
the camera direction largely.
Follow the procedure below.
"CAMERA SETUP" screen
**CAMERA SETUP**
SCENE1
ALC/ELC
ALC
SHUTTER
OFF
AGC
ON(HIGH)
SENS UP
OFF
WHITE BAL
ATW1
DNR
HIGH
D&N(IR)
AUTO1
VMD
SCENE CHANGE
RET TOP END
Step 1
Move the cursor to "VMD" and press the [righT] or [leFT] button to select "SCeNe ChANge".
Note:
• The Scene Change function is activated after exit from the menu.
19