Changing The Presser Foot - ELNA Carina Instruction Manual

Changing the presser foot

a
b
a
e
c
b
d
f
e
Attention: Turn power switch to off ("O") when carrying out any
of the below operations!
Attaching the presser foot holder
Raise the presser foot bar (a).
Attach the presser foot holder (b) as illustrated.
Attaching the presser foot
Lower the presser foot holder (b) until the cut-out (c) is directly above
the pin (d).
Press the black lever (e).
Lower the presser foot holder (b) and the presser foot (f) will engage
automatically.
Removing the presser foot
Raise the presser foot.
Press the black lever (e) and the foot will disengages.
Attaching the
Attach the edge/quilting
according to need for hems, pleats, etc.
g
edge/quilting guide
guide (g) in the slot as illustrated. Adjust
5