ELNA Carina Instruction Manual page 13

Winding the bobbin
Please Note: When the bobbin winder switch is placed on the right, "bobbin winding position", the
machine will not sew and the handwheel will not turn. To start sewing, push the bobbin winder switch
to the left "sewing position".
6. Hold the thread tail securely in one hand.
7. Press on the foot control or the Start/stop button to start
winding the bobbin.
8. After the bobbin has wound a few turns stop the machine and
cut the thread near the hole of the bobbin. Continue filling
the bobbin until it is full. The motor stops automatically
when the bobbin is full. Stop the machine. Push the bobbin
winder spindle to left.
9. Cut the thread and then remove the bobbin.
9