Using The Needle Threader - ELNA Carina Instruction Manual

Using the needle threader

Attention: Turn power switch to the off position ("O").
Raise the needle to its highest position and lower the
presser foot.
Lower the needle threader lever slowly and draw the thread
through the thread guide as illustrated and then to the right.
The needle threader automatically turns to the threading
position and the hook pin passes through the needle eye.
Take the thread in front of the needle.
Hold the thread loosely and release the lever slowly. The
hook will turn and pass the thread through the needle eye
forming a loop.
Pull the thread through the needle eye.
13