New Construction Installation - Greenheck SP110L Installation, Operation And Maintenance Manual

New Construction Installation

Tools needed
Power screwdriver with a Phillips bit
Phillips screwdriver
Flathead screwdriver
Pliers
Wire insulation stripper
Wire cutter
1 - Remove Packaging
Parts Bag holds
Knockout Plate
and six (6) screws
2 - Install Mounting Frame
3
®
Materials needed
• 6" round metal ducting recommended for best
performance. Use of other ducting is acceptable but
may impact performance.
• Roof cap or wall cap (built-in damper recommended)
• Tape to seal duct connections
• Electrical wiring and supplies per local code
requirements
• 4W (max.) C7-type night light bulb
Remove CFL Bulbs
from protective packaging
Remove
Instruction
Sheet
4
Punch out Mask from
packaging. See Step 6.
2
1
SP Ceiling Exhaust Fans
3