Maintenance And Regular Care; Servicing And Repair - Rinnai Prestige Close Coupled Systems Operation & Installation Manual

Table of Contents

Advertisement

IMPORTANT INFORMATION & WARNINGS

MAINTENANCE AND REGULAR CARE

Operate the easing gear of the PTR as described under "SAFETY DEVICES" on page 5.
The overflow tray (supplied by installer) and drain underneath the storage cylinder (if fitted) should be periodically
checked to ensure there are no blockages.

SERVICING AND REPAIR

Our Servicing network personnel are fully trained and equipped to give the best service on your appliance. If your
appliance needs service, ring one of the service contact numbers on the back of this booklet.
It is recommended that the system be serviced at least every 5 years.
The pressure and temperature relief valve and expansion control valve must be checked for performance or
replaced by an authorised person at intervals not exceeding 5 years or more frequently in areas where the water
is classified as scaling water (refer to 'Warranty Terms and Conditions' document - 'Water Quality').
If the electric conduit, power supply cord or plug to the water heater is damaged, they must be replaced by an
authorised person in order to avoid a hazard. The power supply cord and plug (if fitted) must be replaced by a
genuine replacement part available from Rinnai.
Rinnai Australia
- 7 -
Solar Close Coupled Operating / Installation Manual Issue 7 - 16/9/10

Advertisement

Table of Contents
loading

Table of Contents