Slide Show - GTrek II User Manual

Slide Show

The Slide Show button when picked will start the slide show from the selected image. Once clicked
the button will change to Stop Slide Show.
Enable Manual Tagging
The manual tagging feature, only available with an internet
connection, provides a facility to manually GeoTag the digital
images. The process is a simple one requiring:-
1.
That you know where the picture was taken, and
2.
You can find it in Google Earth.
The process is to locate the location on the Google Earth screen on the right. Use the navigation
controls and/or the mouse controls to manipulate the image. Enable the Manual Tagging and the
button will turn green. Select the image to be tagged. move the cursor over the location and hold
down the Alt key and click the left mouse button. The image data will be saved and a yellow Push pin
will appear.
When the Manual Tagging button is pressed a help file is displayed, this can be disabled by un-ticking
and re-displayed from the help menu.
File
Open
This is the same as the Open File details above
Save
The save command is enabled once new GeoTagged data has been created, this will save the data
back to the original picture files. This feature is only available on the Pro version.
Slide Show
This will start the slide show.
Settings
Options
In the Settings->Options menu Slide Show variables can be changed:-
1. The slide show period is the time in seconds between each slide
update.
2. Continuous Show when clicked will cause the slide show to run
continuously until stopped.
3. The Blend Image option will cause the next image to blend into the
last, this requires a large amount of processing power and on some
machines may not create a pleasurable display and thus can be switch off here.
View
© GTrek Ltd. 2013 Page 56 of 62 Version 5.4.0