GTrek II User Manual page 37

9.
Print
Selecting this option will print the current Analysis view on the selected or default
printer
10.
Exit
This will close the Analysis view. If a new route has been
loaded or an existing route changed then a message will be
displayed requesting that the file be saved. The Analysis
view is not actually deleted but just hidden until the
application is closed.
3.
View Options
1.
Profile
Selecting this option will open the Profile display page, this
displays speed and altitude on the same graph.
2.
Animation & POI
When looking at a route it can be difficult to establish the
actual route taken. This utility will show your actual location at
any time during your trip either manually or as an animated
process. Access to setting and deleting Points of Interest are
also accessible through this feature.
3.
GTrek-Track Utility
This option (available only in the GTrek-Track version) will
open the Track utility.
4.
Select Trace Data.
This option allows, in the GTrek-Track version of the program
only, the user to select which tracks should be displayed and
which should not. The default track can also be selected. This
function can also be obtained by selecting the "Traces menu
item" but only one option can be selected at a time.
5.
Zoom In
See Item 6 above.
6.
Zoom Out
See Item 6 above.
7.
Distance in km
Selecting this option will alter the display to show information in metric, clicking again
will revert back to Imperial.
8.
Route Summary
The Route Summary by default is displayed,
clicking this option will turn it off and back on
again. The route Summary can also be moved
about the screen to aid viability. This is achieved by clicking and dragging. If the
Analysis screen is printed and the Route Summary is being displayed then the viable
box will snap to the nearest corner of the printed page. The Route Summary data can
be switched between statistical information on the entire route or vertical speed
bars.
9.
Show Position / Show Height / Show Speed
If this option is selected then cursor located information will be displayed. The actual
information displayed is dependent on the Analysis screen data currently being
viewed.
10.
Show Date/Time/Distance
This option only applicable in the Altitude and Speed views and will show the Date
and Time at the cursor location or distance as appropriate.
11.
Filtered Data
The data displayed is by default not filtered. However it can be switched on or off by
selecting this option to remove noise from the downloaded data. This option also has
a keyboard shortcut Ctrl+F.
12.
Interpolation
Data is normally gathered as a continuous stream however if data is missing then this
© GTrek Ltd. 2013 Page 36 of 62 Version 5.4.0