Analyse - GTrek II User Manual

this data can be inaccurate or in error. The information will eventually be updated and corrected but
may result in incorrect GPS data being recorded.
The three buttons here have the following effect:-
1.
Hot, this button if pressed will instruct your GTrek to perform a hot restart using all current
data available as if it had been woken up from a sleep condition
2.
Warm, this button if pressed will instruct your GTrek to perform a warm restart as if it had just
been switch on.
3. Cold, this button if pressed will instruct your GTrek to perform a cold restart, in this condition
all stored data is deleted and no GPS data is stored until fresh data can be downloaded.
Three check boxes here have the following effect:-
1. Show Globe
Unchecking this box will hide the Earth Image
2. Show Satellites
Unchecking this box will hide the blue and grey satellite circles
3. Show Trails
Checking this check box will cause the trails (if any) to be shown.

5. Analyse

The initial page of the Analysis screen shows the majority of the
collected information on one page. If an internet connection is
available then the actual route data will be overlaid on an image of
the terrain. If no internet connection can be found then the route
data will be display graphically.
1.
The actual route colour coded black for down, red for
uphill sections and blue for flat sections for a graphical
display or red for down, green for up and blue for flat for a
terrain display. The actual display can be changed by
selecting View->Show Map.
2.
The speed map
3.
The altitude map
4.
The route summary
The Analysis screen is dynamically re-sizeable. Click and drag the right or bottom sides to expand or
click and drag the bottom right-hand corner to expand or retract in both axis.
If the route has been saved or a previous route opened then the filename for this route will be
displayed. The total distance travelled is also displayed. Right clicking in the Route Summary section
and you have the option of copying the data to the clip-board or switching the display to speed volume
graph.
The Analysis view is tabb'ed and clicking on the Multi-Route, Route, Altitude or Speed buttons will
change the display accordingly.
A displayed route can be exported to Google Earth™ simply by clicking the Google Earth™ icon
or the Google Earth Tour icon
© GTrek Ltd. 2013
.
Page 32 of 62 Version 5.4.0