Manual Connect; Quick Stastics - GTrek II User Manual

3.2 Manual Connect

Your GTrek data logger automatically connects to
your GTrek program without any intervention from the
user. The Operating System (Windows™) is notified when
any new USB devices are attached to the PC.
If for any reason the operating system is not notified then
the GTrek program cannot detect the device automatically and the manual facility can be utilized to
scan for a device. If the Comm Port number is known then double clicking on the Comm Port Number
box will allow the number to be entered.
Clicking the Scan button will instruct GTrek to scan for a device. This option can take some time
to check the ports registered in your PC. If a device is located then scanning will stop with the Port
number displayed.
Clicking Connect will open the port and close the window.
3.3 Quick Statistics
The Quick Statistics page provides a convenient way of comparing the activity of several days or
several trips.
Existing Quick Statistics files can be open in one of two ways:-
1.
By selecting Open on the home screen File menu, changing the default file type in the bottom
right-hand corner to "Quick Stat Files (*.GSF)" and browsing to the saved location.
2.
By selecting Open form the File menu on the quick Statistics page.
Select Add from the file menu and select as many Route Files as required. Additional Route Files can
then be added later to the current list.
S
ome of the data displayed, Name and Resort for example are taken from data entered in the Trip
Details. The remaining data is taken from the Route Summary information.
From the file menu several option are available
1.
Add New Data
Add new data from pre-saved Route Files
2.
New
Selecting this option will close and currently selected file and remove any
displayed data ready to create a new entry.
3.
Open
Open a previously saved Quick Statistics compilation
4.
Save
Save the current Quick Statistics compilation (no prompt to over-write
file)
5.
SaveAs
© GTrek Ltd. 2013 Page 23 of 62 Version 5.4.0