Skoda Octavia 2014 Owner's Manual page 92

Note
For the sports seats, the head restraints are integrated into the front seat
backrests. These headrests can not be removed.
Memory Function of the electrically adjustable seat

Read and observe on page 86 first.
The memory function for the driver's seat provides the option to store the po-
sitions of the driver's seat and the external mirrors. Each of the three memory
buttons » Fig. 71 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig.
SET A
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
Saving front passenger mirror settings for reversing
The function of the lowering of the passenger-side mirror surface must be en-
abled in infotainment » Bedienungsanleitung Infotainment, chapter Vehicle
settings (button CAR).
›
Switch on the ignition.
›
Press the required memory button
›
Adjust the rotary knob for the mirrors to the position  or in right-hand drive
to the position  » page 85.
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position
›
Disengage reverse gear.
Fig. 71
Memory buttons and SET button
» page 85.
71.
button, press the desired memory
SET
» Fig. 71.
B
» page
The set position of the exterior mirror is stored.
Retrieving the saved setting
›
Tap the desired memory button
and the driver's door is opened.
Or
›
Press down on the desired memory button
on and the driver's door is closed.
Stopping the ongoing adjustment
›
Press any button on the driver's seat.
Or
›
Press the button
Note
Each time new seat and exterior mirror settings for forward travel are saved,
the passenger exterior mirror setting for reverse travel must also be saved
again.
Memory function of the remote control key

Read and observe
The automatic storage of the driver's seat and exterior mirror positions when
locking the vehicle can be turned on in the memory of the remote control key
(afterwards only as function of automatic storage).
This function can also be activated or deactivated in the Infotainment
nungsanleitung Infotainment, chapter Vehicle settings (CAR button)..
Enable automatic storage
›
Unlock the vehicle with the remote control key.
›
Press and hold any memory button
has assumed the position stored under this button, at the same time press
the button on the remote control key within 10 seconds.

The successful activation of the automatic storage function for each key is
confirmed by an acoustic signal.
Storing seat and exterior mirror settings for driving forward
›
Enable automatic storage.
85.
» Fig. 71 when the ignition is switched off
B
when the ignition is switched
B
on the remote control key.

on page 86 first.
» Fig. 71 on page 89. After the seat
B
Seats and head restraints
» Bedie-

89