Table of Contents
Advertisement
Display the temperature setting for the right side
D
›
Reduce temperature
›
Increase temperature
Display the temperature setting for the left side
E
Display the temperature setting for the right side
F
Depending on equipment fitted:
G
›
Switching on/off aux. heating (standard heating) on/off
›
Switching Climatronic system off
Control the seat heater on the front left seat
Air flow to the windows
Air flow to the upper body
Air flow in the footwell
Switch recirculated air on/off
Control the seat heater on the front right seat
Switch the intensive windscreen heater on/off
Switching the rear window heater on/off
Switching the windscreen heater on/off
Climatronic set in the Infotainment
ment
Switch the temperature setting in Dual mode on/off
Switching automatic mode on
Switch the cooling system on/off
After the cooling system is switched off, only the ventilation function remains
active whereby the minimum temperature that can be reached is the outside
temperature.
Setting temperature
The interior temperature for the left and right side can be set separately or to-
gether.
The temperature for both sides, is set by turning the knob
indicator light in the button is not illuminated).
The temperature for the right side is adjusted by turning the knob
dicator light in the button is lit).
The temperature for the left side is adjusted by turning the knob
cator light in the button is lit).
The interior temperature can be set between +16 ℃ and +29.5 °C. The interior
temperature is regulated automatically within this range.
120
Using the system
» page 122
»
» page 90
» page 117
» page 90
» page 80
» page 80
»
Operating instructions for Infotain-
» Fig. 126
A
If a temperature lower than +16 ° C is selected, then the respective tempera-
ture display lights up.
If a temperature higher than 29.5 ° C is selected, then the respective tempera-
ture display lights up.
At both end positions, Climatronic runs at maximum cooling/heating output
and the temperature is automatically not regulated.
Controlling blower
The blower stage can be manually adapted to suit your particular needs.
If the blower speed is reduced to a minimum, Climatronic is switched off.
The set blower speed is displayed when the respective number of warning
lights illuminate in the control dial
Automatic mode
The automatic mode is used in order to maintain a constant temperature and
to demist the windows in the interior of the car.
Automatic mode works in three modes - moderate, medium, and intensive.
Setting the individual operating modes
ment, chapter Vehicle settings.
Climatronic is set to the medium setting at the factory.
After the automatic mode is switched on, Climatronic works in the last selec-
ted mode.
The currently selected mode is displayed in the Infotainment display.
Automatic mode can be switched off by pressing one of the buttons for the air
distribution or by increasing/decreasing the blower speed.
WARNING
Do not switch off the Climatronic system for longer than necessary.
■
Switch on the Climatronic system as soon as the windows mist up.
■
(the
Note
(the in-
D
When the intensive windshield defroster is switched on, the air flow to
■
the windows is switched on. The air flow to the windows will remain on
even after turning off the intense windshield defroster.
(the indi-
A
Do not stick anything onto or cover the interior temperature sensor
■
» Fig. 126
as this could impair the functioning of the Climatronic.
B
» Fig.
126.
C
»
Operating instructions for Infotain-
Advertisement
Chapters
Table of Contents
