English
Tip
[CNPS11X Extreme Only]
For Quiet Mode, please
connect RC24P to the Fan
Connector.
B. AMD Socket Installation
1) AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2 Installation
① Unfasten the Bolts on the Cooler's Base one thread, insert the AMD Clip
between the Cover and the Base, and then refasten the Bolts.
② Install Bolts to the Backplate according to the Socket Type and secure
with Side Caps.
1
.COM
RC24P
(Fan RPM resistor)
Motherboard
Connector
Caution
Make sure the AMD Clip's ingresses
are flush against the protrusions of
the Base Cover.
Align
AMD Clip
9