Gyro I/F Circuit Cmj-304E - JRC JMA-5212-4/6 Service Manual

4.2.7. GYRO I/F Circuit CMJ-304E

[Required tools]
A Phillips screwdriver for 3 mm screws
[Removal]
(1) Remove the four screws that secure the NSK Unit
NCT-4106A cover.
(Phillips screwdriver for 3 mm screws)
(2) Disconnect the gyro/log cables.
(3) Detach the connector that is attached to the
GYRO•LOG I/F circuit.
Remove
Remove
4-43