Power Supply Unit Nbd-866A - JRC JMA-5212-4/6 Service Manual

4.2.2. Power Supply Unit NBD-866A

[Note]
Before the power supply unit can be replaced, the power connectors of the processor unit must
be disconnected.
[Required tools]
A Phillips screwdriver for 3 mm screws
[Removal]
(1) Remove the six screws to remove the top cover.
(Phillips screwdriver for 3 mm screws)
Remove
(2) Remove the screws from both sides and the bottom of the power supply unit.
(Phillips screwdriver for 3 mm screws)
Remove
Remove
Remove
4-34