Table of Contents
Advertisement
2.5.3. Radar Processing Circuit CDC-1350
(1) S300: 6-bit DIP-SW.
factory-set to OFF. Do not change any of
the factory settings.
1:
OFF (Do not change this setting.)
2:
OFF (Do not change this setting.)
3:
OFF (Do not change this setting.)
4:
OFF (Do not change this setting.)
5:
OFF (Do not change this setting.)
6:
OFF (Do not change this setting.)
(2) S301: 4-bit DIP-SW. Do not change any
of the factory settings below.
1:
ON (Do not change this setting.)
2:
ON (Do not change this setting.)
3:
OFF (Do not change this setting.)
4:
OFF (Do not change this setting.)
2.5.4. AIS Processing Circuit CDC-1353
Connect the jumpers as shown in the picture.
All the bits are
S300
S301
2-20
Advertisement
Table of Contents
