Cooling Operation - Dimplex DAC15006R User Manual

NOTE: To vary from Celsius to Fahrenheit by control panel, press both Up and
Down button at least 2 seconds.
Operation Methods.
Timer Set
1.Set timer-off
Press the Timer button when the unit is on. The LED will flash "_ _" five times. During
this period press Up or Down button to adjust set time from 0.5h to 24h. It will vary
0.5h each time in first 3h and 1h each time hereafter. The set time will flash 5 times
after adjusting. When it will display temperature again. Once the set time end, the
unit will turn off automatically.
2. Changing the set time.
When Timer is on, you can check remnant time by pressing Timer button. It will flash
5 times. Press Up or Down button to adjust set time. The set time can also be
cancelled if you press the Timer button once again during the flashing time.
3. Set timer-on.
Press the Timer button when the unit is off. Same as timer-off set. Once the preset
time has passed the unit will turn on automatically.

Cooling Operation.

Press Mode button
mode.
Press Up or Down
The range is 18 ~30, the setting will increase or decrease each time a button is
pressed. The selected value will remain showing on the LCD.
Please Note - The temperature adjustment setting is not a direct correlation to the ambient
room temperature. For example adjusting the setting to 18 will not necessary bring the
ambient room temperature down to 18º
Press Fan Speed button on the Control panel or
Control to set the required fan speed.
Press Swing button
vertical louver.
Adjust horizontal louver by hand.
Dehumidifying Operation.
NOTE! The machine operates in the cooling mode but it does not lower the room
temperature. It absorbs the excessive humidity present in the air.
Remove the exhaust tube from the air-conditioner or direct the outlet back into the
room.
Press Mode button or
speed is automatically selected to Low.
on Remote Control or
to adjust temperature cooler or warmer.
on Control Panel or Remote to adjust the direction of the
on the Remote to choose Dehumidifying mode. The fan
on Control Panel to select Cool
on the Remote