Fault Condition - Worcester GREENSTAR CDi CLASSIC 29CDi GC User Instructions

3.8 FAULT CONDITION

In the unlikely event of a fault occuring while the boiler is in operation the reset button and the main power indicator will flash.
The display will show a fault code.
3 4
2
1
To reset the boiler:
B Press the reset button for three seconds.
The reset button and the mains power indicator will stop flashing.
The boiler will function normally, dependent on programmer and room thermostat settings.
If the fault cannot be cleared by pressing the reset button:
B Refer to the fault finding section on page 12 of this user guide.
B Call Worcester, Bosch Group, giving a description of the fault and, if possible, the fault code from the seven
segment display. Alternatively contact other Gas Safe registered personnel for assistance.
6 720 803 600 (2012/06)
2
5
1
6
max
reset
eco
4
3
e
6
max
OPERATING THE BOILER
9